PC BENCH Solution to ensure a clean work area in the presence of smoke or dusty materials

PC BENCH is a new range of suction benches designed to ensure a clean work area in the presence of smoke or dusty materials that safeguards operators and the production environment.

Due to its characteristics, this type of filter is suitable for coating, deburring, welding, and polishing operations in the marble and wood industry, in the metalworking sector, in foundries and in many other types of applications.

 

  • Grinding
  • Miscellaneous processing

  • Efficiency:Efficiency: Emissions ≤ 5 mg/Nm³*
    *Other emissions obtainable on request
  • Low Noise Level 68/75 dBA depending on the model
  • Limited maintenance thanks to an efficient counter-washing Pulse-jet cleaning system
  • Customised plant engineering solutions

Suction bench complete with Filtration system

Suction benches complete with filtering system with self-cleaning cartridges and automatic pneumatic counter-washing, electric fan and dust collecting drawers on the bench side and filter area. The automatic pneumatic cartridge cleaning system maintains the suction capacity, washing it by blowing compressed air that sends the dust into the specific drawer.

 

Suction bench connected to a centralised filtering system

The suction bench without filtration system is suited for connection to centralised filtration systems.

For more information, please contact us: (021) 758-759-88 or you can email to profiklin@profiklin.com

PC® CART High Efficiency Cartridge Filters Solution for Solve All Dry Filtration Problems

HFiltration_Cartridge-filter-PC-Cart-1.jpg

includes compressed air self-cleaning high efficiency cartridge filters that can solve all dry filtration problems.
The air being treated enters the filter by passing through a pre-chamber that helps separate the coarser particles; the flow then goes through the cartridges, depositing the contaminant outside of them, while clean air is delivered from the filter head.
A cyclical electronic panel sequentially cleans the cartridges.
The filtering cartridges with Ø125mm and length of 1,500 mm are equipped with SEEGER fastening system for quick maintenance. The fibre used for the cartridge is chosen based on the application. The cartridge must be removed from the filter roof.
The high filtering surface of each cartridge grants small overall dimensions, which, in comparison to traditional bag filters, also makes it possible to install PC® CART in indoor environments.

  • Efficiency: Emissions ≤ 5 mg/Nm³*
    *Other emissions obtainable on request
  • Modular System
  • Standard versions from 16 to 64 cartridges
  • Standard versions from 2,000 to 16,000 m³/h
  • Optimisation of consumption and energy savings
  • Customised plant engineering solutions
  • Limited maintenance thanks to the efficient counter-washing Pulse-jet cleaning system
  • Simplified maintenance thanks to the use of quick couplings

  • Welding Smoke
  • Chemical processing
  • Pharmaceutical processing
  • Cement
  • Thermal cutting smoke

For more information, please contact us: (021) 758-759-88 or you can email to profiklin@profiklin.com

FOG DUST SUPPRESSOR Solution for dust removal in Open Spaces

HFiltration_Fog-Dust-suppressor_cava.jpg

 is a machine designed for dust removal in open spaces where capturing suspended dust is particularly difficult. Dust abatement is performed through water mist.

A pump collects the water contained in the tank and pushes it towards the nozzles that are located on the outlet of the axial fan, which is able to extend the water sprayed from the nozzles towards the area affected

The automatic movement of the FOG DUST SUPPRESSOR is made possible by means of a gear motor, which provides a swinging movement of the nozzle of approximately 25°.
Additionally, the machine is equipped with an electrical panel for start and stop and an alarm siren if the minimum limit of the water contained in the tank is reached.
A level switch inserted in the water tank is able to automatically stop machine operation so as to avoid damage to the submersible pump. In the water tank it is able to automatically stop the operation of the machine so as to avoid damage to the immersion pump.

  • Cement
  • Handling Of Dusty Materials
  • Constructions
  • Quarries
  • Mine
  • Landfill Waste
  • Any open area where a great deal of dusts is generated and it is difficult to be slaughtered

  • Easily abate suspended dust that is difficult to remove from an energy and economic point of view.
  • Reduced water consumption: 250 l/h.
  • Tank capacity: 1000 l.
  • Wide pump range of operation: from 150m2 to approx. 200m2.
  • A light placed on the top offers an optimal view of the defined environment even in conditions of poor visibility.
  • Tank water level control with siren and level switch.

For more information, please contact us: (021) 758-759-88 or you can email to profiklin@profiklin.com

PULSATRON COMPACT Solution for Filter Dust Removal with High Efficiency cartridges

 range comprises high efficiency self-cleaning cartridge filters with compressed air capable of solving any problem related to dry filtration.

The contaminated air enters the filter through a prechamber that favors the separation of the thickest particles; then the flow passes through the cartridge, depositing the contaminant outside it, while the clean air is discharged through the filter head. An automatic cartridge cleaning system allows the suction capacity to be maintained, washing it with a compressed air jet that discharges the powder in the corresponding drawer or in the collection drum. The reduced volume and the low noise of the filter allow it to be installed even in the interior of sections close to the source of contamination.

Applications :

  • Coal
  • Cement
  • Welding Fumes
  • Chemical Processing
  • Pharmaceutical
  • Manufacturing
  • Plastic Material
  • Processing
  • Grinding
  • Handling of dust
  • Material
  • Sandblasting
  • Deburring
  • Silo Venting

For more information, please contact us: (021) 758-759-88 or you can email to profiklin@profiklin.com

Five Tips Solution for Using a High Pressure Water Cleaner to Make it Last Longer

High pressure cleaner is a device whose process is based on the compression of water at high pressure. Basically the working principle of a high pressure cleaner is the same as an air compressor, but what sets it apart is the compressed object. For compressors, the compressed object is usually a gas or air, while for a high pressure cleaner it is a liquid.

Now we will give ” Five Tips Solution for Using a High Pressure Water Cleaner to Make it Last Longer” :

13266ffa95d171627.png
23738cc13feadccba.png
3e466eb51dcba48ef.png
4f53bfbe0695e08b3.png