Biofilters

Biofilters

Biofiltration is a technology by which the gaseous emissions to be treated are conveyed through a biologically active porous medium.

This is nothing more than a sort of bed made up of materials such as bark, shredded wood, mature compost, and peat kept at constant temperature and humidity conditions and colonized by aerobic microorganisms capable of degrading the compounds to be treated present in the airstream.

It is important to emphasize that colonization and metabolic activities occur within the biofilm which, in this case, is the water film that is created around the particles of the solid part of which the biofilter is made.

Before leaving the filter bed, the airstream is enriched with carbon dioxide, of the others volatile organic compounds produced and the heat generated by biochemical reactions.

APPLICATIONS

Advantages

Request Information More !!

Washing tower – SCRUBBER

Washing tower SCRUBBER

Washing tower - SCRUBBER

The scrubber is a filtering device to abate the concentration of VOC and dust found in gas streams. It is used when the substances to be removed react in water.


Abatement takes places through impact between the nebulised washing liquid and the pollutants in the air. The polluted air is suctioned into the lower part of the washing tower and is washed in counter-current at low speed over a broad contact surface.


Wet abatement systems can be composed of several washing stages, even with different types (e.g. Venturi scrubber, floating washing tower, static washing tower, horizontal scrubber) and with different washing solutions according to the pollutants to be removed and their concentrations.

APPLICATIONS

Advantages

Request Information More !!

Cartridge filter – PULSATRON COMPACT™

xr:d:DAF1Y4ndUvs:18,j:2950268308245228522,t:23112721

Cartridge filter
PULSATRON COMPACT™

The Pulsatron Compact® range includes a wide variety of compressed air self-cleaning high efficiency cartridge filters that can solve all dry filtration problems.

Polluted air goes into the filter through a pre-chamber that helps separate the coarse particles; the flow then goes through the cartridges, depositing the contaminant outside of them, while clean air is delivered through the filter head.


An automatic cartridge cleaningsystem maintains the suction capacity, washing them by blowing compressed air that directs the dustinto the specific collection drawer or bin.

The limited dimensions and minimal noise of the filter mean it can be installed even inside departments near the sourceofpollution.

APPLICATIONS

Advantages

Request Information More !!

Cartridge filter – PULSATRON COMPACT™ ATEX

Cartridge filter
PULSATRON COMPACT™ ATEX

Reliable and silent, Pulsatron Compact® ATEX is a high efficiency self-cleaning modular dust remover cartridge filter suitable for continuous cycle industrial use.

PC® ATEX series filters are designed for industrial applications where dry dust filtration through the principle of physical separation in qualified Ex II 3D environments is required.

The air being treated enters the filter, through a pre-chamber which helps separate the coarse pollutant particles. The air flow then passes through the filtering cartridges, depositing the contaminant outside them, while the clean air is discharged from the upper part of the filter. A cyclic device manages the cleaning of the filter elements with a Pulse-jet system.

IThe Pulse-jet cleaning system consists in the counter-current injection of a high pressure air flow to remove the dust from the filtering elements without interrupting operation. In the event of an explosion, the vent panel mounted on the filter body mechanically collapses by venting the overpressure generated inside the filter upwards.

The design has been created in collaboration with ATEX standard experts and using cutting edge software (Cosmos, Fem and Solid Works3D) that made it possible to carry out simulations to offer Pulsatron Compact ATEX high resistance.

APPLICATIONS

Advantages

Request Information More !!